Carver HR-742
Carver HR-742
Amplifier Section
8-ohm FTC rated power/ch 80 W
4-ohm FTC rated power/ch 130 W
2-ohm dynamic power/ch 150 W
Bridged mono power -
4/8-ohm FTC rated THD 0.09 %
Rated full power bandwidth 20-20kHz
S/N-IHF A-Weighted,dB 101
Slew Rate -
Dimensions (HxWxD inches) 5.25x19x15.5
Comments Stereo receiver
Tuner Section
IHF Sensitivity mono/stereo,dBf 11.3
Capture ratio,dB 1.5
AM Suppression,dB 65
Alt. ch. sensitivity,dB 72
Seperation at 1kHz,dB 46
THD at 1kHz,stereo 0.15 %
Maximum S/N,stereo,dB 70
Station presets 20
Comments Receiver
PreAmp Section
Frequency response 20-20kHz +- 1dB
Maximum Output -
Total Harmonic Distortion See Amp Section
S/N-IHF A-Weighted See Amp Section
Phono sensitivity for 0.5V@1kHz 3.5
MM Phono Overload mV 120
Phono input capacitance pF -
MM S/N A-weighted 0.5v ref. 80
MC S/N A-weighted 0.5v ref. -
Tone Controls -
Inputs 6 audio/3 video
Comments Sonic Holography
 
Remote Control AN Receiver with Sonic Holography and ACCD. 80 watts into 8 ohms. 130 watts into 4 ohms. 6 audio inputs. 3 video inputs. 2 video outputs. Sonic Hologram Generator for true 3-dimensional sound* Asymmetrical Charge-Coupled FM Detection circuitry for crystal clear reception. 30 AM/FM presets. Preset scan and auto/manual tuning. Signal strength indicator. Programmable "sleep timer". Motorized volume control. Switchable cable/antenna inputs. Pre-main input/output jacks. A/B speaker selection. Bass/treble tone controls. Balance control. 2 convenience outlets. Headphone jack. 24-button remote control. Function read out on front panel display.
Sponsors